Bought a strap advertised at 10,000 lb and cannot work out why it only counts for a fraction of that? Enter the number on the label to see the working load limit you are allowed to use, and why the gap exists.
Decode Any Strap Label — Break Strength vs WLL Explained
The tag on your strap has multiple numbers. Most people read the wrong one as the working limit. Fix that in 30 seconds.
Enter your strap’s labelled break strength or WLL. The decoder outputs the corresponding WLL or break strength, and the applicable safety factor standard.
Strap misuse from label misreading is a leading cause of cargo securement failure. FMCSA inspectors cite by WLL, not break strength.
Drivers, loaders, fleet supervisors, and anyone reading a strap or chain tag.
- FMCSA 49 CFR §393.106
- WSTDA strap labelling standards
- ASME B30.9 safety factors
Disclaimer: This tool is provided for educational and informational purposes only and does not constitute legal, safety, or professional advice. Sunferno Automotive Accessories cannot verify how products are installed, used, or attached in your specific vehicle or situation — proper installation, use, and securement are solely the responsibility of the user. Laws and regulations vary by jurisdiction and change over time; always confirm current requirements with your local authorities or a qualified professional. Sunferno products must be used strictly in accordance with manufacturer instructions and applicable regulations.