Two minutes in the yard is cheaper than an out-of-service order at the scale. Enter what you have actually got strapped on to see whether your aggregate WLL and tie-down count clear federal minimums, and by how much you are short.
DOT Cargo Compliance — Check Your Load Before the Scale House
DOT inspectors have a checklist. Now you have one too. Walk through it before you pull out of the yard.
Select your load type, vehicle class, and cargo details. The checker applies FMCSA 49 CFR §393 and tells you exactly which requirements apply to your specific haul.
A single DOT cargo violation can trigger an out-of-service order. Compliance is load-specific — what’s legal for lumber is not legal for steel coils.
Commercial drivers, owner-operators, fleet dispatchers, and load planners.
- FMCSA 49 CFR §393 (full cargo securement standard)
- DOT inspection criteria
- CDL cargo compliance requirements
Disclaimer: This tool is provided for educational and informational purposes only and does not constitute legal, safety, or professional advice. Sunferno Automotive Accessories cannot verify how products are installed, used, or attached in your specific vehicle or situation — proper installation, use, and securement are solely the responsibility of the user. Laws and regulations vary by jurisdiction and change over time; always confirm current requirements with your local authorities or a qualified professional. Sunferno products must be used strictly in accordance with manufacturer instructions and applicable regulations.